Our Products
Specifications and technical documents for the adhesives we supply.
Pre-Catalysed Urea Formaldehyde
Powder Resin
| Appearance | Free-flowing white powder |
|---|---|
| Viscosity @ 32°C | 3,000 – 5,000 cps |
| Gel Time @ 32°C | 35 – 65 minutes |
| Packaging | 25 KGs PP bag |
Fast-Setting Aliphatic Resin
Emulsion Adhesive
Best used in edge and face gluing as well as general assembly gluing.
| Viscosity | 3,000 – 4,500 cps |
|---|---|
| Appearance | Cream colored liquid |
| Solids | 44.2 – 47.0% |
| pH | 4.0 – 5.0 |
Q&A
Answers to common questions about our products and how to use them. Can't find your answer? Talk to our sales team.
Ask our sales teamAstamite™ C One Shot is a powder resin for laminating, veneering, doweling, finger jointing, door production and high-grade furniture assembly. Titebond® 50 is a ready-to-use viscous liquid glue for edge and face gluing and general assembly where a fast set is needed. Not sure? Contact our sales team and we will recommend the right one for your process.
No. Astamite™ C One Shot is a pre-catalysed, fully compounded adhesive, so no additives are required. It cures at room temperature.
The gel time is about 35–65 minutes at 32°C. Higher temperatures shorten the working time, so mix only what you can use within that period.
Both products have a shelf life of about 6 months. Keep Astamite™ C One Shot in a cool, dry place away from direct sunlight and reseal the bag after use so the powder does not harden. Keep Titebond® 50 in a closed container at around 21°C.
No. Titebond® 50 is not freeze/thaw stable. Its minimum use temperature is about 2°C (35°F). If the product has been frozen, contact us before using it.
Typical assembly time is 5–10 minutes and press time is 30 minutes to 2 hours, depending on the wood species, moisture content and room conditions. Allow an overnight cure before machining the panels.
A moisture content of 6–8% is recommended. Wetter wood greatly increases clamp time and can cause panel shrinkage, stress cracks or joint failure. Joints should be straight, clean and freshly prepared.
Titebond® 50 cleans up with water while still wet. Warm water or steam will soften dried glue. Coating clamps and press platens with wax or a release agent makes cleaning easier.
You can download them on our Products and Contact pages, or ask our sales team for the latest versions.
Astamite™ C One Shot comes in a 25 kg bag. Titebond® 50 comes in a 20 kg pail.
The minimum order is just 1 bag or 1 pail.
Yes, free of charge. We provide 0.5–1 kg of each product depending on your pressing method: 0.5 kg for cold pressing and 1 kg for hot pressing. If you need to test several batches, we can supply a suitable quantity at a special price. Contact our sales team and tell us which product and application you would like to test.
Yes. Delivery is free for customers in Bangkok and the surrounding provinces. For other provinces, shipping is charged at actual cost. Delivery usually takes 1–2 days.
Your first order is paid in cash or by bank transfer. After that, we offer 30-day credit terms from the delivery date. Credit terms of up to 90 days can be considered on request. We issue tax invoices for every order.
Yes. Our team can visit your factory to help with trials and give technical advice on using the adhesive in your production process.
Call, message us on LINE or email our sales team, or use the quotation form on the Contact page. Please tell us the product, quantity and your application so we can advise you properly.
Our sales team is happy to advise on products, samples and application.
